iPhone Back Glass Repair with Forward Blue Light Laser: Step-by-Step Guide

iPhone Back Glass Repair: A Guide with Forward Blue Light Laser Machine

At Parts4Cell, we understand the frustration of a cracked or damaged back glass on your iPhone. Whether it’s from an accidental drop or an unfortunate impact, repairing the back glass can restore your device to its former glory. In this blog, we’ll walk you through the process of back glass repair using the Forward tools, specifically designed to make your repair experience as smooth as possible.

 

Why Choose the Forward Blue Light Laser Separation Machine?

The Forward Blue Light Laser Separation Machine is specifically designed to make back glass repairs easier and more precise. Here’s why it’s an essential tool for your repair toolkit:

  • Precision Cutting: The laser technology ensures accurate cutting, reducing the risk of damaging your device.
  • Ease of Use: With a user-friendly touch panel, operating the machine is straightforward and efficient.
  • Enhanced Efficiency: Speeds up the repair process, allowing for quicker turnaround times.

 

You can purchase the Forward Blue Light Laser Separation Machine here.

 

 

Step-by-Step Guide to Using the Blue Light Laser Separation Machine

 

1. Power Off the iPhone

  • Ensure that the phone is completely shut down before beginning the repair process.

2. Position the Phone

  • Place the phone flat into the positioning mold of the Blue Light Laser Separation Machine.
  • Tip: Align the phone according to the direction indicated by the sticker on the mold.

3. Adjust the Laser Head

  • Move the laser head to adjust the local length.
  • Attention: The distance between the focal length rod and the back cover glass should equal the diameter of the focal length rod.
  • Ensure the focal length rod is positioned directly below the arrow of the laser head, not in the center.

 

4. Secure the Focal Length Rod

  • Hold the focal length rod in place, making sure it’s properly aligned.
  • Tighten the knob to secure the adjustment.

5. Operate the Machine

  • Use the touch operation panel to navigate the machine:
    • Unlock the keys by clicking the Unlock key.
    • Select Carving from the options.
    • Choose the iPhone drawings folder.
    • Navigate to the Back Cover drawings folder and select the Multicolour folder.
    • Locate and click on drawing 12 Pro Max.g.
    • Press the Figures key to start the laser operation.
  • Wait until the green progress bar reaches 100%, indicating that the laser process is complete.

6. Remove the Back Cover Glass

  • After the laser has completed, locate the large laser area.
  • Use the focal length rod to gently break the glass.
  • Employ a shovel blade to carefully dismantle the back cover glass.
  • Warm Tip: Breaking glass in a larger, crack-free area makes removal easier.
  • Pay attention to the wireless charging sensor. Use a card to insert between the coil and the back cover, avoiding the coil’s bottom.

7. Handle the Glass Carefully

  • When removing glass near the camera, use a blasting pen, diamond pen, or cutting device to break it into smaller pieces.
  • Ensure that small glass fragments do not fall into the microphone area.

8. Clean Up

  • Use a clean sponge or brush to gently wipe off any glass shards.
  • Remove residual glue using a clean cloth and 8333 cleaner.
  • Use a shovel blade to clear glue from the phone’s edges.

9. Reinstall the Wireless Charging Sensor

  • Place the coil and magnet of the wireless charging sensor back into position with glue.

10. Replace the Back Cover

  • Apply frame glue evenly to the back of the phone.
  • Align and install the new back cover, ensuring proper hole alignment.
  • Use LCD fixing clips to secure the phone and allow it to hold pressure for about 30 minutes.

11. Final Check

  • Remove the LCD fixing clips and inspect the phone. Ensure there is no dust on the camera and that the back cover fits perfectly.
  • Test the phone to confirm that all functions, including wireless charging and the camera, are working correctly.

 

Conclusion

Replacing the back glass of an iPhone 12 Pro Max can be a straightforward task with the Blue Light Laser Separation Machine. This machine enhances repair efficiency and success rates, making it an invaluable tool for mobile phone refurbishers. For more information and to purchase this advanced tool, visit Forward Machine.

For all your mobile repair needs and high-quality parts, check out Parts4Cell’s extensive range of products on our website.

Happy repairing!